HDF laminated flooring profiles

Product advantages

  • Every profile is available in different thicknesses and is suitable for all current parquet and laminate floors.
  • Material and colour are matched to the floor - no unsightly contrast (almost unlimited choice of colours for laminate or parquet).
  • Highly resistant through a choice of corundum- covered foil, solid veneer, or real laminate covering with overlay (IP 2000 in accordance with EN 13329).
  • Low swelling HDF E1.
  • Professional, invisible installation.
  • Quickly and easily removable at any time for cleaning, maintenance, or replacement.
  • Can be individually cut to practical lengths of 0.9 or 2.7 m / 2.95 or 8.86 ft. (stair profiles 1.35 or 2.7 m / 4.43 or 8.86 ft.).

End profile

 

No. 4 = 11,5 x 32 mm / 7/16" x 1-1/4" = rabbet 8 mm / 5/16"
(approx. 7 - 11 mm / 9/32" - 7/16" laminate)
FN clik-fix MS

Additional Compensation tracks for rabbets:
FN clik-fix 8 from 10 - 13 mm/ 13/32" - 1/2"
FN clik-fix 9 from 14 - 18 mm/ 9/16" - 23/32"

Transition profile

 

No. 4 = 11,5 x 42 mm /7/16" x 1-21/32" = rabbet 8 mm / 5/16"
(approx. 7 - 11 mm / 9/32" - 7/16" laminate )
FN clik-fix MS

Additional compensation tracks for rabbets:
FN clik-fix 6 from 10 - 13 mm/ 13/32" - 1/2"
FN clik-fix 7 from 14 - 18 mm/ 9/16" - 23/32"

Motion profile

 

No. 1 = 11,5 x 42 mm /7/16" x 1-21/32" = rabbet 8 mm / 5/16"
(approx. 7 - 11 mm / 9/32" - 7/16" laminate )
FN clik-fix MS

Additional compensation tracks for rabbets:
FN clik-fix 8 from 10 - 13 mm/ 13/32" - 1/2"
FN clik-fix 9 from 14 - 18 mm/ 9/16" - 23/32"

Stair profile

 

No. 1 = 18 x 54 mm / 23/32" x 2-1/8" = rabbet 8 mm / 5/16"
(approx. 7 - 11 mm / 9/32" - 7/16" laminate)
FN clik-fix MS

Additional compensation track for rabbets:
FN clik-fix 8 from 10 - 13 mm / 13/32" - 1/2"
FN clik-fix 9 from 14 - 18 mm / 9/16" - 23/32"

Decors laminated

Oak
Cherry
Maple
Beech
Mahogany
Walnut
Many special decors on request

Decors cork

Coarse-lacquered
Lightly-lacquered
Fine-lacquered
Fine-raw