Flexible solid wood parquet profiles

Solid wood parquet profiles - specially designed for curves

This innovative, high quality parquet profile made of solid wood is specially designed for curved walls and pillars.

Installation instructions:

  • This wooden profile can be bent in cold state - provided that its moisture content has not fallen below 15 %.
  • The wood profile has sufficient moisture content if it can be bent slightly while retaining the curved shape. If this attempt is unsuccessful, the wood must be dampened again. To do this, remove the profile from the foil bag, wet thoroughly with water, place the profile back in the bag and leave overnight to allow the moisture to take effect.
  • Repeat the process if the profile is still not sufficiently flexible.
  • The form wood profile should be left to dry out for a few days after installation before beginning to apply the surface treatment.
  • Standard length is 150cm
Flexible parquet profile no.1
Flexible parquet profile no.2
Installation example
Oak
Cherry
Maple
Beech
Ash
Walnut
SS: 1 piece in foil
Consolidated cardboard packing for 10 SS packs