HDF veneered flooring profiles
Product advantages
- Every profile is available in different thicknesses and is suitable for all current parquet and laminate floors.
- Material and colour are matched to the floor - no unsightly contrast (almost unlimited choice of colours for laminate or parquet).
- Highly resistant through a choice of corundum-covered foil, solid veneer, or real laminate covering with overlay (IP 2000 in accordance with EN 13329).
- Low swelling HDF E1.
- Professional, invisible installation.
- Quickly and easily removable at any time for cleaning, maintenance, or replacement.
- Can be individually cut to practical lengths of 0.9 or 2.7 m / 2.95 or 8.86 ft. (stair profiles 1.35 or 2.7 m / 4.43 or 8.86 ft.).
End profile
No. 6 = 17,5 x 32 mm/11/16" x 1-1/4" = rabbet 14 mm / 9/16"
(approx. 13 - 17 mm / 1/2" - 21/32" solid veneer)
FN clik-fix MS
Additional compensation tracks for rabbets:
FN clik-fix 8 from 15 - 18 mm/ 19/32" - 23/32"
FN clik-fix 9 from 20 - 23 mm/ 25/32" - 29/32"
Transition profile
No. 6 = 17,5 x 42 mm/11/16" x 1-21/32" = rabbet 14 mm / 9/16"
(approx. 13 - 17 mm / 1/2" - 21/32" solid veneer)
FN clik-fix MS
Additional compensation tracks for rabbets:
FN clik-fix 6 from 15 - 18 mm/ 19/32" - 23/32"
FN clik-fix 7 from 20 - 23 mm/ 25/32" - 29/32"
Motion profile
No. 3 = 17,5 x 44 mm/11/16" x 1-23/32" = rabbet 14 mm / 9/16"
(approx. 13 - 17 mm / 1/2" - 21/32" solid veneer)
FN clik-fix MS
Additional compensation tracks for rabbets:
FN clik-fix 8 from 15 - 18 mm/ 19/32" - 23/32"
FN clik-fix 9 from 20 - 23 mm/ 25/32" - 29/32"
Stair profile
No. 3 = 18 x 54 mm / 23/32" x 2-1/8" = rabbet 14 mm / 9/16"
(approx. 13 - 17 mm / 1/2" - 21/32" solid veneer)
FN clik-fix MS
Additional compensation tracks for rabbets:
FN clik-fix 8 from 15 - 18 mm / 19/32" - 23/32"
FN clik-fix 9 from 20 - 23 mm / 25/32" - 29/32"
Decors veneered
Oak
Cherry
Maple
Beech
Mahogany
Walnut
Many special decors on request
Decors cork
Coarse-lacquered
Lightly-lacquered
Fine-lacquered
Fine-raw
