At any time!
FN Neuhofer is your reliable partner. Even now in these challenging times we are of course there for you. At all times!
We are aware of our responsibility towards our employees and take this very seriously. By taking appropriate measures in each area, we can ensure that we are ready for action and ready for delivery.
We do our utmost to process your orders in the well-known high quality and best possible delivery time. Of course we will keep you informed about further developments.
Huge selection of more than 50,000 articles
We create products that the future owing to their innovativeness and functionality. Choose from an extensive range of floor, wall and ceiling products or allow our customer service team to advise you.
Quality products Made in Europe
"WE. KNOW. WOW!" is the guideline running through all areas of the company - from strategic planning to customised and innovative solutions for our customers to stringent checks when applying quality assurance.
Smooth delivery by our shipping partner
These services are provided in particularly impressive fashion by our logistics centre. All of our orders are processed ready for delivery on a surface area of 16,700 m² and our global network of partners facilitates the optimal distribution of our goods as well as a rapid and reliable delivery service.
For the safety of our employees.
The well-being and health of our employees is our top priority and we have
therefore taken a number of internal "corona measures" to protect us all as best as
- Daily information on the current corona situation
- Notes on correct behaviour and proper disinfection
- Additional disinfection protection in the whole company
- Compliance with the safety distance in all areas
- Wearing of face masks for protection
- Adjustment of the shift operation
- Daily fresh fruit
What can we do for you?
Our product range:
Why go the long way when there is a short cut. With FN digi-direct, you can now print directly on a variety of base materials such as plastics, aluminium and solid wood - without first having to print on paper or veneer, which in turn then has to be glued to the desired surface.
FN white lacquered spruce and pine profiles
Finger-jointed spruce or pine is used as base material to keep the skirting board straight. The surface is white lacquered and fits perfectly into any living area.
FN flush-pro: Plaster-Flush Skirtings
It is very practical when everything is flush with the wall. You can place your furniture right on the wall and you no longer have to clean the baseboards. The plaster-flush baseboard is the answer.
The strip is made of aluminium and is applied before the wall is plastered.
FN digi-pan: digitally printed boards
A new addition to the FN portfolio are digitally-printed three-layer boards in spruce or MDF boards with different dimensions and surface treatments, e.g. brushed, chopped, or plainly sanded.
It is possible to print directly onto the natural surface of the board, thereby showcasing the character of the board surface. Alternatively, it is also possible to print on a white-primed surface, which achieves an especially impressive colour intensity in the end product.
FN skirting connector
Transporting profiles is often difficult due to their length. This has prompted us to develop the FN skirting connector, which makes it possible to transport shorter skirtings from location to location more easily.
This is an important development as online sales continue to grow and lengths optimised for dispatch are increasingly required.
FN Clipholder CH28 - Screw and Nail
The screw goes into the wall, and the profile is attached on the nail. It's as easy as that, and it works with nearly all materials: softwood, hardwood, MDF, plastic.
To install, the clip goes into the wall like a screw. Depending on the type of masonry, the enclosed screw anchor can be used.
On the exterior, there are only two small nails on which the profile is attached or hammered down. The clip's installation height is not tied to any grooves in the profile and can be freely selected within the profile height.
This new profile with built-in LED strips conjures up beautiful light effects. The LED profile is a successful combination of fixing rail and LED shaft. Any Neuhofer profile with a height of up to 90 mm and a clip nut attachment can be added.
FN LED-ceiling profile
Indirect lighting creates a truly special atmosphere at home. For e.g.on the ceiling, with the new FN crown moulding for LED lighting.
The FN LED ceiling solution is a white, powder-coated aluminium profile that blends with the room as discretely as possible. It is installed on the wall just below the ceiling. It also includes a hidden channel for screws so that the mounting is no longer visible after installation.
Skirting for kitchen work surfaces
We are from the wood sector and know that you can't saw wood without creating sawdust in the same way that you can't make an omelette without breaking eggs. Or cook in a kitchen without creating steam and spraying grease, using aggressive cleaning materials and spilling things that are not meant to be spilled. So the joint between the wall and the work surface needs to be covered to prevent all this getting behind the work surface. That is what wall connection profiles do.
They are available in different sizes and decorations, ideally replicating the pattern on the surface.
All the skirtings have sealing lips that press firmly against the wall when fitted and prevent grease, humidity or dirt from entering the joint behind them.
FN cut-pro - Shortenable renovation skirting boards
FN cut-pro can be shortened individually in accordance with taste and application.
This skirting board is most advantageous in renovations. Old strips of carpet that are glued to the wall and that are a nuisance because beautiful new laminate or LVT flooring has now taken the place of the carpet. Or tiled skirting that is no longer liked and needs to be covered.
On these skirting boards a cutter is used to separate the cover foil along a pre-milled groove and the unwanted section simply broken off backwards. If this is difficult then the cutter can help on the groove on the reverse.
This makes it possible to cut 3 different heights from one skirting board, depending on the intended purpose.
FN clik-fix 17 - Fixing track for cabling
In addition to the individually shortenable renovation skirting FN cut-pro, there is now a special fixing track with corresponding space for cabling.
Like the skirting itself, the rail can be shortened as needed and offers space for at least four 9 mm (11/32") cables.
Using a built-in clip system, the skirting board is easily snapped onto the rail attached to the wall - regardless of the chosen height.
FN white&pure - White foam skirting boards
Beauty lies in the eye of the beholder but lightness can be measured and water resistance is something that is becoming increasingly important as vinyl and LVT flooring becomes more popular. FN white&pure skirting boards unite all these properties in one product.
The weight advantage is a result of a foamed polystyrene core that is enclosed by a smooth, robust, white outer shell that provides an attractive appearance.
The water resistance is a product of the material: PS (polystyrene), a plastic that is also free of chlorine. Thus FN white&pure offers many positive characteristics in addition to the white colour, which is a current trend for skirting boards.
FN clik-fix 23
It just became even easier to fix the skirting to the track. Perfect tolerance compensation has been created with soft lips attached to the back of the mounting bar. Humidity fluctuations in the wood or MDF board or crooked walls - the soft lips compensate for everything.