FN Installation Springs

Considerable relief when laying the floor

The decisive advantage in this application is that these installation springs can remain in the expansion joint after the floor has been installed - without causing damage, as experience shows is the case with forgotten spacer wedges. With the FN IS 1 and FN IS 2 installation springs, bulging of the floor due to moisture, temperature changes or forgotten spacer wedges can be avoided.

The FN IS 1 and IS 2 installation springs were developed as an effective support for the floor layer when installing so-called click floors, where the spring can be used from a floor thickness of 6 mm.

The FN installation springs are simply inserted into the expansion joint and thus replace the spacer wedges during floor installation.

Product advantages

  • Very easy to use.
  • Bulging of the floor can be prevented.
  • Centring of the floor.
  • Lasting inhibition of the joint opening of the floor.
  • Practical application due to breakable individual springs.
  • IS 1 for floor thicknesses from 6 mm (laminate flooring), IS 2 for floor thicknesses from 11 mm (parquet flooring).
  • Patented (AT 503230 B1, AT 503231 B1)